Dell OpenManage Network Manager Client Manual page 318

default-information originate
no auto-summary
no synchronization
exit-address-family
!
address-family ipv4 vrf VPN_PE_A
redistribute ospf 10 vrf VPN_PE_A match internal external 1 external 2
no auto-summary
no synchronization
exit-address-family
!
In addition, within this configuration, you want to check if the target lines are present under each
address-family in the router bgp section. To scan for this, follow these steps:
Select the Match All of the following radio button and enter both of the above lines as match
1
criteria. Select the Config Term as match Regex for each line, so the order in which these lines
appears does not matter.
Add a source group criterion to search for a section that begins with "routers bgp"—in regex:
2
routers\sbgp. No end match criterion is needed. Click Apply.
Click Add to make another criterion. This time, the start is address-family\s, and the
3
end is exit-address-family. Click Apply.
You should see both criteria listed in the editor
4
Applying the first group criterion finds the match (underlined) in the following:
5
router bgp 88
bgp log-neighbor-changes
neighbor 2.3.4.5 remote-as 22
neighbor description "This is Test"
neighbor test-parameter xxx
neighbor 4.5.6.7 remote-as 66
neighbor description "This is Test"
neighbor test-parameter xxx
!
318
ProScan Portlet | Change Management – ProScan