Dell OpenManage Network Manager Client Manual page 365

Look in Job Viewer for the results.
8
Click Set attribute extraction results, click here to see the results appear in the bottom panel.
Notice also that you must check informational messages for all these to appear, and that
several additional sets of messages besides the extraction results appear.
Create a Monitor for the External Script Adaptive ACLI
Now that you have verified the script is working, you can create a monitor to see how this attribute
is doing.
In the Monitors portlet, create a new ACLI Monitor
1
Uncheck Update Network Status (recommended since the ICMP monitor is already doing
2
this)
In Monitor Options select your example monitor configured previously.
3
Confirm that Monitor Attributes displays the Status attribute configured previously.
4
In the Conditions tab of the Monitor Editor, create "Status Up" condition, with the severity
5
of Informational, and check Alert.
Create a criterion which is Status = 0.
6
Save this condition
7
Create a new Condition called "Status Down"
8
The criterion is Status = 1
9
Apply and Save
10
External Commands | Actions and Adaptive CLI
365