Dell OpenManage Network Manager Client Manual page 358

Error Conditions
The error condition lets you configure errors for your script.
Click Add new error conditions to configure a condition at the bottom of this screen with the
following fields:
Error Pattern—Enter a regular expression for the error.
Error Type— Select from the pick list of options (Error, Warning, Ignore).
Number of lines to check— Enter the number of lines of the script output to check for the pattern
specified above, after each command execution. An error message is most likely to appear
immediately right after the command is invoked.
Continue Pattern
Like Error Conditions, this screen lets you
enter conditions to which script execution
can respond.
The Continue Pattern editor operates like
the Error Conditions editor, but has slightly
different fields.
Continue Pattern—If you expect the
device output of a script to prompt to
continue, you may add a Continue
Pattern with a regular expression to parse.
Answer—This field specifies the Answer to the Continue Pattern prompt.
Send New Line—For some devices, a single key response without a new line would be sufficient;
in such cases, you may need to uncheck the Send New Line option.
Max Occurrences—Indicates the maximum number of times respond to a prompt. The default
value zero (0) indicates no limit.
358
Actions Portlet | Actions and Adaptive CLI