Dell OpenManage Network Manager Client Manual page 311

Enabled—Check to enable this policy.
Description— A text description of the policy. This also appears when the policy is listed in the
manager.
Input Source
Use the radio buttons to select a source. Select from among the following options:
Device Backup— Retrieve the configuration from the device and scan it for compliance.
Current Config—The scan the current configuration backed up from the device.
Configuration Label—Select the configuration to run against based on a label. This software
automatically updates the Current label so it points to the most recently backed up
configuration files.
By date— When you click this radio button, you can then select a configuration file backed up
that precedes a specified date most closely in a selector that appears below the radio button.
NOTE:
You can scan even historic configurations for compliance, with the Based on date field. There is no
validation to ensure this date is the current one.
Adaptive CLI— Select a desired Show Adaptive CLI to scan the target device below the radio
button. The policy configured scans the show results, and that show appears in the Audit
screen.
ProScan Portlet | Change Management – ProScan
311