Container View; How To: Use Containers - Dell OpenManage Network Manager Client Manual

Container View

This (non-instanceable) container portlet displays configured
containers for Dell OpenManage Network Manager. Because it
is non-instanceable, only one can appear on a page.
Expand the container tree by clicking the plus to each
container's left. The container selected acts as a filter for a
screen's other Dell OpenManage Network Manager portlets. If
you select "Folsom" as a location in the container portlet, then
only items related to Folsom devices appear in the other
portlets on the page. If you select a parent container, that expands the selection to include all child
containers' selections. It does not, however select everything. You can configure containers in
Container Editor, described in the next section.
NOTE:
You may have to wait a few moments to see a container's contents accurately.
Portlets that respond to Container or Map Context "filtering" include the following: Audit Trail,
Event History, Locations, Vendors, Contacts, Managed Resources, Ports, Authentications,
Discovery Profiles, Monitors, Services.
Tip
If a container displays unexpected results, right-click it to refresh its membership or alarm state.
How To:
Use Containers
Create the containers you would like for filtering views of resources. For example, you can
1
create a container for each customer or location.
Create a page with Managed Resources or other container-filtered portlets (Ports, Alarms and
2
so on).
Add the Container View portlet to that page.
3
Click the container to filter by.
4
Observe the other portlets to see resources assigned to the selected container, for example,
5
customer or location.
Container View | Resource Management
147