Deploy Configuration - Dell OpenManage Network Manager Client Manual

Deploy Configuration

When you deploy a configuration, a screen appears to configure how that occurs.
It has the following fields:
Select Firmware Image
Firmware Image—The identifier for the image
Description— The description for the image
Version—The version for the image
Generate and Save Configuration Only—Check this if you simply want to configure for later
restoration.
Label for Configuration— Enter a label name, if applicable.
Select Targets for Deployment
Use the Add Equipment or Add Groups buttons to select individual devices or groups of devices
(both are possible together). Use Remove All to delete all targets, or use the delete icon in the
Action column to delete individual equipment or groups.
NOTE:
The listed targets must still pass the filter set in the editor's General Parameters.
240
Deploy Configuration |