Dell OpenManage Network Manager Client Manual page 156

The Filters (by Location, Vendor, or Device Type) let you narrow the list of devices discovered
by the selected item(s). As the screen says, this filtering will not have any impact on the
processing that occurs during the Inspection step.
NOTE:
Fields like Location query the database for current information, so even though its field may appear
empty, Locations may exist. Click the Search button to the right of this field to populate it. Keeping such
fields empty until you use them enhances performance.
The buttons at the bottom of the Profile Editor let you navigate through this series of panels.
Previous / Next move back and forth between screens, Save lets you preserve whatever stage
you have configured, and close the editor, Inspect moves directly to the Inspection screen
(described below), and Execute triggers the discovery profile and opens the Results panel,
displaying message traffic between Dell OpenManage Network Manager and the device(s).
Click the "X" in the top right corner of these screens to close them without saving.
If you discover devices without retrieving their hostnames, and that hostname is needed later, you can
run the Resolve DNS Hostnames activity to get the hostname. This fetches the DNS hostname and
resyncs the device.
Network
The Network Panel collects the network (IP range, hosts, and so on) and the authentication
information for the discovery profile.
156
Discovery Profiles | Resource Management
Tip