Groups > Dell PowerConnect W Config Page With Global Configuration Enabled
When Use Global Dell PowerConnect W Configuration is enabled in AMP Setup > General, focused submenu
page displays and edits all configured Dell PowerConnect W AP groups, with the following factors:
Dell PowerConnect W AP Groups must be defined from the Device Setup > Dell PowerConnect W
Configuration page before they are visible on the Groups > Dell PowerConnect W Config page.
Use this page to select the Dell PowerConnect W AP Groups that you push to controllers.
Use this page to associate a device group to one or more Dell PowerConnect W AP Groups.
From this page, you can select other profiles that are defined on the controller, like an internal server.
Figure 3
Groups > Dell PowerConnect W Config When Global Configuration is Disabled
If Use Global Dell PowerConnect W Configuration in AMP Setup > General is set to No, the Groups > Dell
PowerConnect W Config page can be used to manage two or more distinctive configuration strategies using the
same tree navigation as the Device Setup > Dell PowerConnect W Configuration page. Each of the sections is
explained in
Dell PowerConnect W Configuration Sections in the Tree View
Whether you are using global or group configuration, the Dell PowerConnect W Configuration tree view page
supports several sections, as follows:
Dell PowerConnect W AP Groups Section
AP Overrides Section
WLANs Section
Profiles Section
6 | Dell PowerConnect W Configuration in AirWave
Groups > Dell PowerConnect W Config Page Illustration (Partial Display)
"Dell PowerConnect W Configuration Sections in the Tree View" on
page 6.
Dell PowerConnect W-AirWave 7.5 | Configuration Guide