Installation; Connections For Various Functions; Connecting With Cctv Camera, Monitor And Sensor; Alarm Recording Connection - Mitsubishi HS-1024E Installation And Operation Manual

Connections for Various Functions

Connecting with CCTV camera, monitor and sensor

MICROPHONE
Note
• Monitor to be connected
– Connecting with a CCTV monitor (for surveillance) is recommended.
– Connecting with some monitors may cause picture vibration and/or picture distortion at the top or bottom of the image at still
picture or normal playback.
– A television for domestic use may easily cause picture vibration and distortion.
• CCTV camera to be connected
– Do not connect 'Colour' and 'Black & White' cameras together.

Alarm Recording Connection

The alarm can be confirmed from a distance by connecting the ALM OUT terminal with an existing alarm system panel or other
peripherals such as a buzzer. Connect the VCR and other peripherals as shown below. (
Reference page
SENSOR
ALM IN GND
ALM RST REC GND ALM MODE CLK
IN OUT
REMOTE IN OUT
AUDIO
AUDIO AUDIO
IN OUT
MICROPHONE
AMPLIFIER
Alarm reset switch
ALM RST REC GND ALM
IN
Alarm set switch
CCTV CAMERA
VIDEO OUT
VIDEO
IN
CALL
IN OUT RESET
VIDEO
VIDEO
OUT
VIDEO IN
AUDIO IN
External alarm lamp
and buzzer
MODE CLK CALL
OUT
MONITOR
page 12 for the menu setting)

Installation

19