Programming Summary for the Answering System
You can programthe followingfunctionsusing the handset near the
base unit. See the page numbers below for details.
The TALK end DIGITAL SP-PHON# Indicator lights must be off
before programming,
Liftthe handset, and
(:PROGRAM).
press
4,
Press _.
* _'Answe_'ihg system
setting"
is displayedon lhe handsel
_lr
• If the handset displays"Out of
range"
and an alarm
tone sounds, move closer to base unitand try again.
TO adjustthe time end day, press (_.
(page 26)
To set th_ _mote code, press [_.
(page 67)
To select:the number of rings, press {_.
(page 29)
To Selectthe ealier's recording time, press _.
(page 28)
TO select the pager mode setting, press _].
(page 64)
To store your home telephone number, press {_.
(page 62)
T0 store e p_lger
number,pressI_.
(pages 60, 61)
*_he base unit displayShows numbers or characters related Io the
adjUstm_ht or settings.
4,
Press _
*A!ong b sep _Ounds.
* if 6 beeps Sound, the setting is not correct, Start _gain from the
beginnirig,
• To cancel duringprogramming,press _.
Start again from the
beginning.
• If 6 beeps sound during programming,a wrong key was pressed.
Enter the correct number.
J
1
Ii_ poweH& i_d_i
_e Seff!,gs ma_:re|_m to the factory preset,
25