Setting The Unit To Call A Pager - Panasonic KX-TC1741B Manual

Setting the Unit to Call a Pager
Press IPLAYBACK_.
• The number of new messages is
heard on the handset.
2
Press {_,
• "I_1';1_" is displayed on the base
unit.
• If "_" is not displayed, the
pager number is not stored.
Store the number (p. 60, 61), and
try again.
Press IPLAYBACK].
To turn off the pager cell mode,
repeat steps I through 3.
• "_" will disappear.
• Each time you press (_ in step 2, the
mode will turn on or off.
• If anothermessage (or Caller ID call) is received beforethe unitalertsyour
pager for a previousmessage (or Caller ID call), the.previouscaller
informationwillnot be sent to your pager. Only the last call receivedwill be
sent to your pager.
• If someoneelse makes or answers another call with the unitor a parallel
connectedphone before the unitalerts your pager for a previousmessage
(or Caller ID call), the unitwill stop alertingyour pager for that message
(Caller ID call).
• If you receive a caller'stelephone number in your pager but cannot
recognizethe caller, you may have receiveda direct inwarddial (DID) call,
such as from a PBX. Please call your unitto check the calter'smessage.
65