Panasonic KX-TC1741B Manual page 79

Problem
You cannot program items,
such as the dialing mode.
You cannot store a phone
number in memory.
While programming or
seamhing, the unit starts to
ring and stops the
progranYseamh.
The unit does not display the
caller's name and/or phone
number,
Remedy
• Programming is not possible while the
unit is in the talk or speakerphone mode,
when viewing caller information, or while
the answering system is in use.
• Do not pause for over 60 seconds while
programming.
• Move closer to the base unit.
• SEARCH _ or _ may have been
pressed when you picked up the
handset. Press _, then try again.
• You cannot store a number while the unit
is in the talk, speakerphone or intercom
mode, or while the answering system is
in use.
• Do not pause for over 60 seconds while
storing.
• To answer the call, press {J_,
[REMOTE SPI or [DIGITAL SP-PHONE).
Start from the beginning after hanging
up.
• Other telephone equipment may be
interfering with your phone. Disconnect
them and try again.
• Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
• Telephone line n6ise may be affecting
the Caller ID information.
The handset display goes to • Do not pause for over 60 seconds while
the stand-by mode while searching.
viewing the Caller List. • [DIGITAL SP-PHONE_was pressed.
79