Removing The Stand; Replacing The Stand - Dell Studio One 19 Service Manual

Back to Contents Page
Stand
Dell Studio One 19/1909 Service Manual
Removing the Stand
Replacing the Stand
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Stand
1. Follow the procedures in Before You
2. Remove the computer cover (see
3. Remove the shield (see Removing the
4. Remove the four screws securing the stand.
5. Lift the stand away from the computer.
1 screws (4)
Replacing the Stand
1. Follow the procedures in Before You
NOTE: Ensure that you remove the labels from the existing stand and fix them on the new stand.
2. To replace the stand, align the screw holes on the stand with the screw holes on the chassis.
3. Replace the four screws that secure the stand.
4. Replace the shield (Replacing the
5. Replace the computer cover (see
Back to Contents Page
Begin.
Removing the Computer Cover).
Shield).
2 stand
Begin.
Shield).
Replacing the Computer Cover).