6. Replace the shield (see
Replacing the
7. Replace the computer cover (see
Removing the RF Module
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
1. Follow the instructions in
Before You
2. Remove the computer cover (see
3. Remove the shield (see
Removing the
4. Remove the stand (see
Removing the
5. Remove the back I/O panel (see
6. Remove the processor fan (see
7. Remove the right speaker (see
8. Remove the optical drive (see
9. Remove the screw securing the radio frequency (RF) module, flip the module and disconnect the RF module cable.
1
RF module cable
3
screw
Replacing the RF Module
1. Follow the instructions in
Before You
2. To install the RF module, connect the RF module cable.
Shield).
Replacing the Computer
Cover).
Begin.
Removing the Computer
Cover).
Shield).
Stand).
Removing the Back I/O
Panel).
Removing the Processor
Fan).
Removing the Right
Speaker)
Removing the Optical
Drive).
2
RF module
Begin.