Removing The Stand; Easel Stand - Dell 24-3475 Service Manual

Removing the stand

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Easel Stand

1 CAUTION: Place the computer on a flat, soft, and clean surface to
avoid scratches on the display.
Place the computer on a clean and flat surface.
2 Using your fingertips, pry the stand cover off the back cover.
3 Remove the four screws (M3x5) that secure the stand to the system-board
shield.
computer. After working inside your computer, follow
After working inside your computer. For more safety best
www.dell.com/
Before
15