Dell OptiPlex FX160 Manual

About Warning
WARNING:
A WARNING indicates a potential for property damage, personal injury, or death.
Dell™ Wall/Under-Desk Mount
WARNING:
Before beginning, turn off the computer, disconnect the AC adapter from the
electrical outlet and the computer, and remove any other external cables from the computer.
WARNING:
Before installing your computer in an enclosure, read the safety instructions that
shipped with your computer.
WARNING:
Use of screws other than the supplied M4 screws can damage the system.
NOTE:
Use a wall or the desk that supports at least 20 lbs (9.1kg) of weight. Use appropriate
mounting hardware depending on wall or desk material (hardware not included in kit).
Mounting the Bracket to a Wall or
Under a Desk
1 wall
3 wall mounting bracket
Mounting the Chassis to the Wall Bracket
WARNING:
ensure that none of the vents (Dell™ OptiPlex™ FX160/160
has ventilation on four of the 6 primary surfaces) are blocked
on the system.
Thermal Restrictions
The following gaps must be maintained for proper ventilation and cooling:
Top — 2 inches (50.8mm)
Bottom and Right Side — 1 inch (25.4mm)
February 2009
1
2
3
2 screws (4) not
included in kit
Before mounting the chassis to the wall bracket
Mounting the Chassis to the Plate
1 M4 screws (4)
3 chassis mounting plate
1
2
3
2 chassis