Removing The Inverter - Dell Studio One 19 Service Manual

Back to Contents Page
Inverter
Dell Studio One 19/1909 Service Manual
Removing the Inverter
Replacing the Inverter
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Inverter
1. Follow the procedures in Before You
2. Remove the computer cover (see
3. Remove the shield (see Removing the
4. Remove the stand (see Removing the
5. Remove the back I/O panel (see
6. Remove the processor fan and heat sink (see
7. Remove the right speaker (see
8. Remove the optical drive (see
9. Remove the two screws that secure the inverter to the chassis.
10. Disconnect the inverter cable from the inverter.
11. Disconnect the two cables that connect the inverter to the LCD panel.
12. Lift the inverter out of the chassis.
1 screws (2) 2
3 inverter cable
Begin.
Removing the Computer Cover).
Shield).
Stand).
Removing the Back I/O Panel).
Removing the Heat Sink
Removing the Right Speaker).
Removing the Optical Drive).
cables to the LCD panel (2)
and Removing the Processor Fan).