Maytag MHWE550WR01 Use & Care Manual page 5

Parts supplied:
Pedestal
A pedestal will add to the total height of the washer for a total height of 53.5" (1359 mm).
A.Drain hose form
B.Inlet hose (2)
C.Inlet hose washers (4)
D. lTansport bolt hole plug (4)
E.Beaded strap
£ Drain hose
C. Hose clamp
Alternate Parts
Your installation may require additional parts. If you are interested in purchasing one of the
items listed here, call the toll-free number on the cover or in the "Assistance or Service"
section.
If You Have You Will Need to Buy
Laundry tub or standpipe Sump pump system (if not already available)
taller than 96" (2.4 m)
Overhead sewer Standard 20 gal. (76 I.), 30" (762 mm) tall drain tub or
utility sink and sump pump (available from local plumbing
suppliers)
Floor drain Siphon break, Part Number 285834; additional drain hose
Part Number 8318155; and connector kit,
Part Number 285835
Drain hose too short 4 ft (1.2 m) drain hose extension kit, Part Number 285863
Water faucets beyond reach 2 longer water fill hoses:
of fill hoses 6 ft (1.8 m) Part Number 76314,
10 ft (3.0 m) Part Number 350008
Optional pedestal
This pedestal is available in several colors.
To order; call the dealer from whom you purchased your washer or refer to the "Assistance
or Service" section.
Pedestal Height Color Part Number
10" (254 ram) White MHP1000SQ
10" (254 ram) Black MHP1000SB
15.5" (394 ram) White XHP1550VW
15.5" (394 ram) Black XHP1550VB
15.5" (394 mm) Slate XHP1550VE
15.5" (394 ram) Crimson Red XHP1550WR
15.5" (394 ram) Oxide XHP1550VJ
15.5" (394 ram) Evergreen XHP1550VP
Stack Kit
Are you planning to stack your Maytag washer and dryer? To do so you will need to purchase
a Stack Kit.
To order; call the dealer from whom you purchased your dryer or refer to the "Assistance or
Service" section. Ask for Part Number 8212640.
Z'I