Maytag MHWE550WR01 Use & Care Manual page 16

• liquid detergent:
Selector in position for liquid detergent
A. Detergent type selector
B. Main wash compartment
PREWASH A
MAiNWASHV
• Powdered detergent:
A ¸
g ¸
I
Selector in position for powdered detergent
A. Detergent type selector
B. Main wash compartment
LIQUI
SO
SO
Chlorine bleach compartment
(I.etter I]) in Dispenser Illustration)
Add no more than 2/3 cup (160 ml.) liquid chlorine bleach to this compartment. The bleach
will be automatically diluted and dispensed at the best time during the first rinse after the
wash cycle. This compartment cannot dilute powdered bleach.
• Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not
guess. Follow the manufacturer's directions for proper use.
• I])0 not fill beyond the "MAX" level. Overfilling could cause garment damage.
Fabric softener compartment
(I.etter E in Dispenser Illustration)
Pour measured liquid fabric softener into the fabric softener dispense_; if desired.
NOTES:
• Pour only liquid fabric softener into the dispenser.
• I)o not overfill. The dispenser holds V4 cup (60 ml.).
• The fabric softener is dispensed in the rinse cycle. If Extra Rinse is selected,
the fabric softener will be dispensed during the Extra Rinse.
• I)o not use fabric softener dispensing balls in this washer. Dispensing balls will not
operate correctly with this washer.
• I)o not spill or drip any fabric softener onto the clothes.
• At the end of the cycle, a small amount of water may be left in the dispenser.
This is normal.
1o
2.
To pause the washer at any time, select START/PAUSE.
To continue the cycle, select START/PAUSE (for approximately 1 second).
Not all Options and Modifiers are available with all cycles. Cycles, Options, and Modifiers
can be changed anytime before START/PAUSE is selected.
Options and Modifiers can be changed anytime after START/PAUSE is selected and before the
start of the selected Option or Modifier.
To cancel a cycle and begin a new cycle
1. Select POWER/CANCEl twice.
2. Select desired cycle.
3. Select the desired OPTIONS.
4. Select START/PAUSE (for approximately 1 second) to restart the washer at the beginning
of the new cycle.
To cancel a cycle
1. Select POWER/CANCEl once.
2. The washer powers down, the door unlocks, and clothes can be removed.
NOTE: If the water [eve[ or the temperature is too high, the washer will drain automatically
before the door unlocks.
To change Options or Modifiers after the cycle has started
1. Select START/PAUSE once.
2. Select the desired OPTIONS or MODIFIERS.
3. Select START/PAUSE (for approximately 1 second) to continue the cycle.
To drain the washer manually
1. Select START/PAUSE once.
2. Select DRAIN/SPIN.
3. Select START/PAUSE (for approximately 1 second) to begin the drain.
4. When the spin is complete, the door unlocks. Items can be removed from the washer.
16