On.screen S Tatus Displays 29 - Philips VRX344AT Owner's Manual

On.Screen S tatus Displays 29
A status display, which includes the current time, channel, and other
information (see illustration), will appear when you press the STA-
TUS/EXIT button or certain function buttons.The contents of the sta-
tus display may vary.There are three status display modes:
ON SCREEN ON:
• Whenever you press the STOP button or the PLAY button, the sta-
tus display will appear for five seconds.
COUNTER ONLY:
• Whenever you press the STOP button or the PLAY button, the sta-
tus display wilt appear for five seconds.After five seconds, only the
counter will remain on-screen.You must press the STATUS/EXIT
button to remove it.
ON SCREEN OFF:
• The status display will not appear when you press function buttons.
You must press the STATUS/EXIT button to see the status display.
To choose the status display mode, follow the steps below.
Press theVCR button, then press the MENU button to
bring up the main menu display.
_ SELECT PUSH NO. SHOWN 1
P_OGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
END PUSH EXIT
2
Press the Number 2 button to selectVCR SET UR
_ SELECT PUSH NO. SHOWN 1
REPEAT PLAY OFF
ON SCREEN MODE
LANGUAGE
VCR PLUS+ REE MAP
END PUSH EXIT
3
Press the Number 2 button to select ON SCREEN MODE.
COUNTER ONLY
ON SCREEN OFF
!
END PUSH EXIT /
/
4
Press the Number I button to select ON SCREEN ON, the
Number 2 button to select COUNTER ONLY, or the
Number 3 button to select ON SCREEN OFF. ON will appear
beside the selected status display mode.
5
Press the STATUSIEXIT button to exit.
Function
Button
Pressed
STOP
SLP
"!
Tape
Speed
Time Channel
M 1:23i45
I
I
Counter
and
Counter
Memory
If the channel you select has no
broadcast, the screen will become
solid blue.The screen will remain
blue until you select an active chan-
r)eL
• You may bring up the status display
at any time by pressing the STA-
TUS/EXIT button.
(The exception is when viewing a
still picture or a slow motion picture,
or when F.FWD or REW(ind) is
pressed during playback.)
• Channel numbers (when tuned) are
displayed for a few seconds.