On-Screen Status Displays 27 - Philips VRZ362AT99 Owner's Manual

4 hd hifi small clock vcr

Hide thumbs Also See for VRZ362AT99:

Specifications (2 pages)

Table Of Contents

Table of Contents

VRZ362comb.QX33

4/7/99 8:26 PM

A status display will appear when you press the STATUS/EXIT

button or certain function buttons. The contents of the status dis-

play will vary. To choose the status display mode, follow the steps

below.

If you select STATUS ON, then select COUNTER ONLY

ON:

Whenever you press the STOP/p button or the PLAY/o but-

ton, the status display will appear for five seconds. After five

seconds, only the counter will remain on-screen. You must

press the STATUS/EXIT button to remove it.

If you select STATUS ON, then select COUNTER ONLY

OFF:

Whenever you press the STOP/p button or the PLAY/o but-

ton, the status display will appear for five seconds.

If you select STATUS OFF:

The status display will not appear when you press function but-

tons. You must press the STATUS/EXIT button to see the sta-

tus display.

Press the VCR button, then press the MENU button.

Press the PLAY/o button or the STOP/p button to select

VCR SET UP, then press the F.FWD/B button.

Press the PLAY/o button or the STOP/p button to select

ON SCREEN MODE, then press the F.FWD/B button.

Press the PLAY/o button or the STOP/p button to select

STATUS, then press the F.FWD/B button so that OFF

(or ON) appears beside STATUS.

SELECT op CHOOSE B

STATUS

[ON]

COUNTER ONLY

[OFF]

TO END PUSH EXIT

If you set STATUS to OFF, go to step 6. If you set STA-

TUS to ON, press the PLAY/o button or the STOP/p

button to select COUNTER ONLY, then press the

F.FWD/B button so that OFF (or ON) appears beside it.

Press the STATUS/EXIT button.

Page 27