Timer Recording - Philips VRX344AT Owner's Manual

Timer R ecording (cont'd) 3 7
Checking or Cancelling Timer Recordings
!
With the VCR on and in VCR position (the VCR light will appear
on the display panel), press theVCR button, then press the
MENU button.
2
Press the Number I button to select PROGRAM.
3
Press the Number 4 button to select PROGRAM REVIEW, The
timer recording information for the program in the lowest num-
bered slot will appear on-screen, If no timer recordings are set,
nothing will happen when you press the Number 4 button.
4
Press the Number I button repeatedly to review all pro-
grammedtimer recordings. If you don't press the Number I but-
ton in I0 seconds,the VCR will automatically display information
about the next programmed timer recording.This will continue
until all filled positions have been displayed.Then the menu will dis-
appear.
5
To cancel the timer recording displayed, press the CLEAR
button. Either the display will disappear or information about
other timer recordings will appear. If you do not press any other
buttons, the display will disappear after all timer recordings have
been displayed.
6
Repeat steps I - 4 to make sure you have cleared the cor-
rect timer recording.
5
PHILIPS
Helpful Hints
• CLASH may flash on the screen
when you finish setting a timer
recording.This means that the timer
recording you just programmed and
another timer recording overlap, and
thus the current timer recording will
not be carried out. In this case, can-
cel one of the overlapping timer
recordings.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority.
• To stop a started timer recording,
press the STOP/EJECTbutton on
the VCP_
• If the power fails for more than one
minute, programmed timer record-
ingswill be lost. If this occurs, reset
the clock before re-programming
the timer recording(s).
See page 50 for more hints.