Recording 31 - Philips VRX344AT Owner's Manual

Recording 31
.......... _....... ;'e_.... e, ........... '_.' ................ "i . .............. "_ on_'e_.
......... p_ b
• ooeJe illeJe
Read and follow the ste elo to co at evision pro
I
_!_ Insert a tape in theVCR.
L.
Turn the TV on and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of theVCR is set to.
2 8m
Insert a tape with its record tab intact (see page five) in the
VCR.The power will come on, and the Cassette-Inside light will
appear.
3 5
Press the VCR button on the remote control.
7
4
If theVCR light appears on the display panel of theVCR, go to step
5. If the VCR light does not appear, press theVCR/TV but-
ton once,
5
Press the (Tape) SPEED button on the remote control until
the desired tape speed (see page 36) appears on theTV screen.
The tape speed will disappear from the screen after about five sec-
onds;.
6
Use the CHANNEL (UplDown) buttons or the Number
buttons to select the channel to be recorded.
7
Press the REC(ord)IOTR button once to start recording.The
REC.(ord) light will appear.
8
To pause the recording (for example, during commer-
cials), press the PAUSE/STILL button once. The REC(ord)
lighl:will flash. To start recording again, press the
REC(ord)/OTR button or the PAUSE/STILL button again.
The, REC(ord) light will come on again.
9
To stop recording, press the STOP button.
3
®
9
6
• If the REC(ord)IOTR button is
pressed when there is not a tape in
the VCR, NO CASSETTE will flash
on-screen.
• If the REC(ord)IOTR button is
pressed while a tape without a
record tab is in the VCR, the VCR will
eject the tape and PROTECTED
CASSETTECANNOT RECORD will
flash on-screen.
• Other recording options are on
pages 32 - 42.
• You can change the tape speed
while the VCRis recording, but some
distortion will appear on the tape.
• The VCR will record in a preset vol-
ume.