Timer Recording - Philips VRX344AT Owner's Manual

34 Timer Recording
!• • • •col•e••• eelll• i! • • • o• • ll • eolieiole • • • IB• • IIBI •tIooeleil •1 o• • • • •loci •llo•la • I• • el • •eel•o• o• •1• • 1•1••• !
Follow the steps below to program yourVCR to record TV pro-
grams while you're away from home.You can program up to eight
timer recordings. For each one, theVCR will turn itself on, record,
and _curnitself off automatically. Before you begin make sure:
• Channels are programmed.
• The clock is set.
• There is a tape in theVCR. Make sure the tape's record tab is
intact and the tape is long enough to record the program(s).
• The VCR is in VCR position.The VCR light will appear on the dis-
play panel when theVCR is in VCR position. If theVCR light
does not appear, press theVCR/TV button once.
Do each step within 60 seconds of completing the previ-
ous step. If you don't, you may start again at step I.
I
Press theVCR button, then press the MENU button to
bring up the main menu display.
PROGRAM
I
VCR SET UP
"I_NER SET UP
SET CLOCK
END PUSH EXIT _IV
2
Press the Number I button on the remote control to select
PROGRAM.
I!E S °H° 1
ONCE
DAILY
WEEKLY
PROGRAM REVIE_/V
rND PUSH EXIT
3
Select a once, daily or weekly recording.
• Press the Number I button to select ONCE. The VCR will
record a TV program on any day you choose, up to 12 months
away.
• Press the Number 2 button to select DALLY. TheVCR will
record every day from Monday to Friday - starting at the same
time and for the same length of time.
• Press the Number 3 button to select WEEKLY. TheVCR
will record on the same day, at the same time, and for the same
length of time every weel_
/_AILY PROGRAM (MON-FRI)
Daily
/PROGRAM -I 2 3 4 5 6 7 8-
J
Recording
/
Menu I SE'ECT PROGRAM NUMBER
Screen _
END PUSH EXIT
®
• If you need to make a correction
while programming a timer record-
ing, press the CLEAR button until
the cursor is flashing on the item
you want to change. Then enter the
correct information.