Playing - Philips VRX344AT Owner's Manual

30 Playing
Read and follow the steps below to play a tape. / Turn on the TV.
I
Turn the TV on and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of theVCR is set to.
Insert a tape in theVCR.
2
Insert a tape in theVCR.The power will come on.TheVCR
will place itself in VCR position automatically (the VCR light and
the Cassette-Inside light on the display panel of the VCR will
appear). If the tape's record tab has been removed, playback will
start automatically.
3
If playbackdoes not start automatically, p ress the PLAY button
to start playback.
4
Press the STOP button on the remote control or the
STOPIEJECT button on theVCR once to stop playback.
5
Press the REW(ind) button on the remote control or theVCR
to rewind the tape.
6
When the tape stops, press the EJECT button on the
remote control or the STOP/EJECT button on theVCR to
remove the tape.
3
5
4
DmD I
DDD
D D r-;-1 o _]
....... D B
_ .... ®
SEARCH van SLOW
©© ®
PHILIPS
6
• If the tape you want to play is
already in the VCR,make sure the
VCR power is on and the VCR is in
VCR position. (The VCR light will
appear on the display panel.) Press
the VCR button, then press the PLAY
button.
• Other playback options and fea-
tures are on pages 43 - 49.