I0 Hookups W itha Stereo TV
VIDEO (yellow) andAUDIO (white) OUT
Jacks
m
antenna or cable to
ANT(enna) IN Jack
r,
Video Cable
Audio Cable
Audio andVideo
IN Jacks on TV
•
Audio and Video cables are not supplied.
I
Connect
the antenna
or cable to the ANT(enna)
IN Jack
on the back of the VCR.
2
Connect
a video cable to the yellowVIDEO
OUT
Jack on
the back of the VCR.Then,
connect the other end of the
video cable to theVIDEO
IN Jack on yourTV.
3
Connect
an audio cable to the white AUDIO
OUT
Jack on
the back of the VCR.Then,
connect
the other
end of the
audio cable to the AUDIO
IN Jack on yourTV.
4
Turn
on yourTV,
making sure it is in Line Input mode. Please
refer to your "IV owner's manual for details.
This hookup will not give you stereo
sound. To get stereo sound, use the
connectJons on pages six - seven
and select the channel to be viewed
at the TV (with the VCR turned off).