Adjusting Effect Parameters In Real Time (Rtm) - Zoom player 3000 Operation Manual

Adjusting Effect Parameters in Real Time (RTM)

The 3000 incorporates a so-called RTM (real-time modulation) function which lets the user change effect
parameters in real time, using the FUNCTION switch. This makes it possible to adjust, for example,
overdrive, distortion, or reverb mix during a performance. It is also possible to control several parameters
simultaneously. The parameter(s) to be affected by RTM, the change distortion, and the change step
width can be set for each patch individually.
To use the RTM function, perform the following steps.
TALKING BOX
POSITION
PRE DRIVE MAIN DRIVE EQ
1.COMP 1.OD 2.B-OD 1.3-BAND EQ
2.BOOSTER 3.DIST 4.FUZZ 2.PHASE
3.OVERDRIVE 5.GRU 6.LEAD 3.PEDAL-WAH
4.TALKING BOX 7.METAL 8.ACO 4.AUTO-WAH
Sens/Gain
Gain/Top High/Depth
(Talking Gain)
Attack/Tone
Tone/Body Midf/Rate/Sens
(Talking Mode)
Level Level MidG/Reso
(MIC Level) ZNR Low/Stage/Inv
VOLUME RTM POSITION Level
PRE DRIVE RTM MAIN DRIVE RTM EQ RTM
ADVANCED GUITAR EFFECTS PROCESSOR
1
Press the EDIT key to activate the Edit mode.
STEP
2
Use the Module Select keys to select the module to be controlled by RTM.
STEP
If the module is off, press the Module Select key once more to turn it
on.
Use the Parameter Select keys to select parameter 1, operate the VALUE knob
3
STEP
and select the effect type.
Refer to the section "Effect Types and Parameters" and check the control target
4
parameter for the currently selected effect type. Then select this parameter with
STEP
the Parameter Select keys.
Which parameter can be controlled depends on the effect type. In the
"Effect Types and Parameters" table on page 36 - 45, the parameter
marked with " RTM" can be controlled by RTM.
For example, when the DELAY module is selected, parameter 5 (Mix
( RTM) can be controlled by RTM.
ADVANCED GUITAR EFFECTS PROCESSOR
FUNCTION MODE BANK(VALUE)
SERI/PARA SEAMLESS
EFFECT 1 EFFECT 2 DELAY REVERB
1.MANUAL
1.PITCH 2.HPS 1.PITCH 2.HPS 1.NORMAL 1.HALL1 2.HALL2 2.BANK DOWN
U O
3.DETUNE 3.CHO 4.FLG 2.ANALOG 3.ROOM 1
3.DELAY( )
TAP&HOLD
4.PEDAL-PITCH 5.TREM/PAN 3.HOLD 4.ROOM 2
4.BYPASS
5.STRING 6.RING MOD 5.PP-DELAY
5.MUTE
Pitch/Key Pitch/Key/Depth Time(x100mS) Time 6.RTM
(BOTH)
7.VOLUME
U
Tone/Scale/Time Fine/Scale/Rate Time(x1mS) Tone/FB USER PRESET
EDIT(CANCEL) GROUP
Shift/Mode/Dly Shift/Mode Feedback Mix
Bal/Mix Bal/Mix/Peak Mix Patch Level
Amp Sim Mode SERI/PARA SEAMLESS FUNCTION Mode
EFFECT1 RTM EFFECT2 RTM DELAY RTM REVERB RTM
BANK
FUNCTION
SEAMLESS
STORE
VALUE
REVERB
2.HALL2
Time
REVERB RTM
1, 9
11, 12
3, 5, 7
3, 4, 6
2
EDIT ( CANCEL )
VALUE
23