Using The Remote Pedal; Rp01 Names Of Parts / Connections - Zoom player 3000 Operation Manual

Using the Remote Pedal

The optional remote pedal RP01 allows use of its foot switch in place of the FUNCTION switch on the
3000. The RP01 has two modes, which serve for different functions.
• RTM mode
The remote pedal RP01 serves for continuously varying the RTM control target for a patch or the
VOLUME RTM. This allows use for pedal wah or the pedal pitch shifter. It is also possible to use the
FUNCTION switch on the 3000 for volume control and the RP01 for RTM control.
• DELAY mode
This mode allows use of the switch on the RP01 for delay time tap input and hold delay operation. It is
also possible to use the FUNCTION switch on the 3000 for RTM and the RP01 for tap input.

RP01 Names of Parts / Connections

SERIAL NO.
REMOTE IN
REMOTE IN
(1) Control pedal
(with integrated switch)
(2) Foot switch
(8) Mode Selector
(1) Control pedal (with integrated switch)
Serves to control the RTM target parameter or VOLUME RTM etc. By depressing the pedal fully in
RTM mode, pedal wah or pedal pitch shifter can be turned on or off with an integrated switch.
(2) Foot switch
Can be used for on/off switching of pedal wah or pedal pitch shifter, and for delay time tap input and
other functions.
(3) STATUS LED
Shows the operation status of the RP01.
(4) Effect Monitor LEDs
Indicate the on/off condition of the pedal wah and pedal pitch shifter functions.
(5) VOLUME ASSIGN LED
Indicates the on/off condition of the VOLUME RTM function (When lit, the RP01 can be used to
control the volume.)
(6) RTM MODE LED
Lights up when the RP01 is in RTM mode.
(7) DELAY MODE LED
Shows the on/off state of the DELAY module of the 3000 when the RP01 is in DELAY mode.
(8) Mode Selector
Serves to switch between RTM mode and DELAY mode.
32
DC9V OUTPUT
300mA (PHONES)
REMOTE OUT
PEDAL SW
PEDAL SW
STATUS
MONITOR
PEDAL-WAH ON/OFF(PEDAL SW)
PEDAL-PITCH ON/OFF(PEDAL SW)
VOLUME ASSIGN
MODE DELECT
RTM MODE
MODE SELECT DELAY MODE (PEDAL SW TRIGGER)
MODE SELECT
MIC IN INPUT
(3) STATUS LED
STATUS
MONITOR
PEDAL-WAH ON/OFF(PEDAL SW)
(4) Effect Monitor LEDs
PEDAL-PITCH ON/OFF(PEDAL SW)
VOLUME ASSIGN
(5) VOLUME ASSIGN LED
MODE SELECT
RTM MODE
(6) RTM MODE LED
DELAY MODE (PEDAL SW TRIGGER)
(7) DELAY MODE LED
ADVANCED GUITAR EFFECTS PROCESSOR