Zoom player 3000 Operation Manual page 40

Type 1 OD (Overdrive)
Tube-amp type overdrive distortion. This is a
variation of the PRE DRIVE overdrive distortion.
Parameter 2 Gain ( RTM)
Determines the amount of distortion.
Parameter 3 Tone
Adjusts the tonal quality. Higher values result in
brighter sound.
Type 2 B-OD (Blues Overdrive)
Solid overdrive best suited for blues numbers. The
parameter content is the same as for type 1 (OD).
Type 3 DIST (Distortion)
Large amplifier type distortion. The parameter
content is the same as for type 1 (OD).
Type 4 FUZZ
Vintage fuzz essential for the rock style of the
sixties. The parameter content is the same as for type
1 (OD).
Type 5 GRU
Modern fuzz with a stimulating sound. The
parameter content is the same as for type 1 (OD).
Type 6 LEAD
Clear, distinct sound optimally suited for lead guitar.
The parameter content is the same as for type 1
(OD).
Type 7 METAL
Heavy metal type sound with a prominent treble and
bass. The parameter content is the same as for type 1
(OD).
Type 8 ACO (Acoustic)
Acoustic guitar simulator which changes the sound
of an electric guitar into an acoustic type sound.
Parameter 2 Top
Adjusts the high-frequency range. Higher values
stress the characteristic string sound of an acoustic
guitar.
Parameter 3 Body
Adjusts the low-frequency range. Higher values
result in a more pronounced body sound.
38
Common parameters for type 1 - 8
Parameter 4 Level ( RTM)
Determines the module output level.
Parameter 5 ZNR (P)
This patch parameter controls the sensitivity of the
ZNR (Zoom Noise Reduction) circuit. The
recommended approach is to set the value as high as
possible without producing an unnatural cut of the
instrument sound. When set to "oF", ZNR is
disabled.
Parameter 6 POSITION (P)
This patch parameter determines the connection
method of the MAIN DRIVE module and EQ
module. "ME" (MAIN DRIVE
"EM" (EQ MAIN DRIVE), and "Pr" (parallel) can
be selected.
"ME" setting
MAIN DRIVE
"EM" setting
EQ
"Pr setting
MAIN DRIVE
EQ
When the TALKING BOX effect of the PRE DRIVE
NOTE
module is selected, the signal is directly sent to the
EQ module. The POSITION parameter can therefore
not be set. (Refer to the illustration at the bottom of
page 4.)
Parameter 7 MAIN DRIVE RTM
Determines the change direction and control range
for the parameter marked with " RTM".
ADVANCED GUITAR EFFECTS PROCESSOR
EQ),
EQ
MAIN DRIVE