Returning The 3000 To The Factory Default - Zoom player 3000 Operation Manual

Returning the 3000 to the Factory Default Settings (All Initialize/Factory Recall)
All Initialize is a special function for returning all the patches in the USER group and the values of the
global parameters to their factory settings. Factory Recall allows selective return of a specified patch to
the factory default.
Keep in mind that any patches you have stored will be erased if you
NOTE
implement the All Initialize function.
TALKING BOX
POSITION
PRE DRIVE MAIN DRIVE EQ
1.COMP 1.OD 2.B-OD 1.3-BAND EQ
2.BOOSTER 3.DIST 4.FUZZ 2.PHASE
3.OVERDRIVE
5.GRU 6.LEAD 3.PEDAL-WAH
4.TALKING BOX 7.METAL 8.ACO 4.AUTO-WAH
Sens/Gain
Gain/Top High/Depth
(Talking Gain)
Attack/Tone
Tone/Body Midf/Rate/Sens
(Talking Mode)
Level Level MidG/Reso
(MIC Level) ZNR Low/Stage/Inv
VOLUME RTM POSITION Level
PRE DRIVE RTM MAIN DRIVE RTM EQ RTM
ADVANCED GUITAR EFFECTS PROCESSOR
Cut the power supply to the 3000. ( Be sure to turn the amplifier volume down to
1
STEP
minimum.)
2
While holding the STORE key down, reinsert the AC adapter to power up the 3000.
STEP
A
The indication " " appears on the display and the module LED and
parameter LED are flashing. This indicates that the unit is ready for the
All Initialize function.
• To perform All Initialize:
Proceed to step 3.
• To perform factory Recall:
Use the BANK switch and Foot Switches 1 - 4 to select the patch
from the USER group which you want to return to the default
condition.
* When wishing to terminate the procedure, press the EDIT key. (The
unit reverts to Play mode.)
3
Press the STORE key once more.
STEP
When All Initialize is being carried out, the module LED and parameter
LED are flashing quickly. When initialization is completed, the unit
automatically reverts to Play mode.
When Factory Recall is being carried out, the module LED and
parameter LED are flashing quickly and the specified patch is restored.
The unit then remains in standby mode for more patches. When
wishing to terminate Factory Recall, press the EDIT key to return to
Play mode.
ADVANCED GUITAR EFFECTS PROCESSOR
FUNCTION MODE BANK(VALUE)
SERI/PARA SEAMLESS
EFFECT 1 EFFECT 2 DELAY REVERB
1.MANUAL
1.PITCH 2.HPS 1.PITCH 2.HPS 1.NORMAL 1.HALL1 2.HALL2 2.BANK DOWN
U O
3.DETUNE 3.CHO 4.FLG 2.ANALOG 3.ROOM 1
3.DELAY( TAP&HOLD )
4.PEDAL-PITCH 5.TREM/PAN 3.HOLD 4.ROOM 2
4.BYPASS
5.STRING 6.RING MOD 5.PP-DELAY
5.MUTE
Pitch/Key Pitch/Key/Depth Time(x100mS) Time 6.RTM
(BOTH)
7.VOLUME
U
Tone/Scale/Time Fine/Scale/Rate Time(x1mS) Tone/FB USER PRESET
EDIT(CANCEL) GROUP
Shift/Mode/Dly Shift/Mode Feedback Mix
Bal/Mix Bal/Mix/Peak Mix Patch Level
Amp Sim Mode SERI/PARA SEAMLESS FUNCTION Mode
EFFECT1 RTM EFFECT2 RTM DELAY RTM REVERB RTM
BANK
FUNCTION
SEAMLESS
STORE
VALUE
STORE
2, 3
A
STORE
29