Using The Function Switch; Assigning A Function To The Function Switch - Zoom player 3000 Operation Manual

Using the FUNCTION switch

The FUNCTION switch can be used to quickly activate muting or bypass, or to adjust the volume or
effect parameters in real time.

Assigning a Function to the FUNCTION Switch

There are seven modes for the FUNCTION switch which can be selected by the user. To assign a
function, perform the following steps.
TALKING BOX
POSITION
PRE DRIVE MAIN DRIVE EQ
1.COMP 1.OD 2.B-OD 1.3-BAND EQ
2.BOOSTER 3.DIST 4.FUZZ 2.PHASE
3.OVERDRIVE 5.GRU 6.LEAD 3.PEDAL-WAH
4.TALKING BOX
7.METAL 8.ACO 4.AUTO-WAH
Sens/Gain
Gain/Top High/Depth
(Talking Gain)
Attack/Tone
Tone/Body Midf/Rate/Sens
(Talking Mode)
Level Level MidG/Reso
(MIC Level) ZNR Low/Stage/Inv
VOLUME RTM POSITION Level
PRE DRIVE RTM MAIN DRIVE RTM EQ RTM
ADVANCED GUITAR EFFECTS PROCESSOR
1
Press the EDIT key to activate the Edit mode.
STEP
2
Use the Module Select keys to select the REVERB module.
STEP
The module LED of the REVERB module starts to flash.
3
Use the Parameter Select keys to select parameter 6 (FUNCTION Mode).
STEP
FUNCTION Mode is a global parameter which serves to control the
FUNCTION switch. The setting is not affected by the on/off status of
the REVERB module.
4
Use the VALUE knob to select one of the modes 1 - 7 listed below.
STEP
Seven modes are available for the FUNCTION switch, as described
below.
1: MANUAL
Toggle between Manual mode and Play mode. For information on
Manual mode, please refer to page 20.
2: BANK DOWN
Switch the bank to the next lower number (opposite direction from
18
FUNCTION MODE BANK(VALUE)
SERI/PARA SEAMLESS
EFFECT 1 EFFECT 2 DELAY REVERB
1.MANUAL
1.PITCH 2.HPS 1.PITCH 2.HPS 1.NORMAL 1.HALL1 2.HALL2 2.BANK DOWN
U O
3.DETUNE 3.CHO 4.FLG 2.ANALOG 3.ROOM 1
3.DELAY( TAP&HOLD )
4.PEDAL-PITCH 5.TREM/PAN 3.HOLD 4.ROOM 2
4.BYPASS
5.STRING 6.RING MOD 5.PP-DELAY
5.MUTE
Pitch/Key Pitch/Key/Depth Time(x100mS) Time 6.RTM
(BOTH) SEAMLESS
7.VOLUME
U
Tone/Scale/Time Fine/Scale/Rate Time(x1mS) Tone/FB USER PRESET
EDIT(CANCEL) GROUP STORE
Shift/Mode/Dly Shift/Mode Feedback Mix
Bal/Mix Bal/Mix/Peak Mix Patch Level
Amp Sim Mode SERI/PARA SEAMLESS FUNCTION Mode
EFFECT1 RTM EFFECT2 RTM DELAY RTM REVERB RTM
BANK
FUNCTION
VALUE
Patch Level
FUNCTION Mode
REVERB RTM
ADVANCED GUITAR EFFECTS PROCESSOR
3
1, 5
4
2
EDIT ( CANCEL )
FUNCTION Mode
REVERB RTM
VALUE