Effect Parameters - Zoom GFX-1 Operation Manual

Effect Parameters

This section explains all effect types and parameters in the effect
modules.
●
How to read the "Effect Parameters" listing
Display
Shows the settings that can be selected for each module with the VALUE
[+] / [-] keys. Depending on the selected effect module, the effect type,
parameter setting value, or both are shown.
Effect type
only shown
F U
Effect type
Module on/off
For every effect module, selecting
the "oF" setting will turn the
module off. (The "oF" setting
cannot be selected if the
[PLAY/EDIT] selector is set to
"PATCH LEVEL" .)
･ Except for pedal wah, when an effect type with the pedal icon is
HINT
selected, the sound will reflect a representative setting of that module.
･ If no effect type with a pedal icon is selected within a patch, the
expression pedal operates as volume pedal.
Parameter setting
value only shown
4 0
Setting value
PLAY/EDIT selector
The illustration shows the selector position for calling up the effect
module/effect parameter.
WAH
WAH module
This module comprises auto wah and pedal wah for use
with the expression pedal. Use the VALUE [+] / [-] keys to
select the effect type and adjust the effect intensity.
AUTO WAH
This effect type automatically varies the amount of wah dependent on playing
intensity. Higher setting values result in higher input sensitivity for the auto wah
effect, so that wah operates also with low input signal levels.
PEDAL AUTO WAH
The expression pedal adjusts the sensitivity for auto wah.
PEDAL BOOST
This effect type allows using the expression pedal for pedal wah, where
the pedal can be used to shift the emphasized frequency up or down.
OFF
Turns the WAH module off.
Effect type and parameter
setting value shown
Effect type
Pedal icon
When you select this effect type, the
respective effect module can be controlled
in real time with an expression pedal
connected to the GFX-1. Which parameter
is changed by moving the pedal also
depends on the effect type.
C 9
Setting value
ZOOM GFX-1 23