Changing Parameter Settings Of Effects - Zoom player 3000 Operation Manual

Changing Parameter Settings of Effects

You can choose any parameter of an effect module and change the setting and value as desired.
TALKING BOX
POSITION
PRE DRIVE MAIN DRIVE
1.COMP 1.OD 2.B-OD
2.BOOSTER 3.DIST 4.FUZZ
3.OVERDRIVE
5.GRU 6.LEAD
4.TALKING BOX 7.METAL 8.ACO
Sens/Gain
Gain/Top
(Talking Gain)
Attack/Tone
Tone/Body
(Talking Mode)
Level Level
(MIC Level) ZNR
VOLUME RTM POSITION
PRE DRIVE RTM MAIN DRIVE RTM
ADVANCED GUITAR EFFECTS PROCESSOR
1
Use the Module Select keys to select an effect module.
STEP
The flashing module moves to the LED for the selected module.
2
Use the Parameter Select keys to select the parameter.
STEP
The flashing parameter LED moves to the LED for the selected
parameter.
• When you have switched a module or parameter, the display
HINT HINT
changes accordingly.
• The settings of patch parameters and global parameters can
also be changed in the same way.
• The topmost parameter controls the effect type. When the effect
type is changed, the values of other parameters for that module
also change. For the distortion effect types of the PREDRIVE
and MAIN DRIVE modules and for the DELAY module, the
content of the effect parameters does not change.
3
Operate the VALUE knob.
STEP
The current parameter value changes.
For details about the types and functions of parameters of the
HINT HINT
effect modules, see page 36 -45 , "Effect Types and Parameters".
4
Change other parameters in the same way.
STEP
The parameter changes made in this way are temporary. If you do
NOTE
not store the new settings, they will return to the original values
when you return to Play mode and select another patch. (Global
parameters revert to the original setting when the unit is turned off.)
For information on storing patches, please refer to page 17.
16
SERI/PARA SEAMLESS FUNCTION MODE
EQ EFFECT 1 EFFECT 2 DELAY REVERB
1.MANUAL
1.3-BAND EQ 1.PITCH 2.HPS 1.PITCH 2.HPS 1.NORMAL 1.HALL1 2.HALL2 2.BANK DOWN
2.PHASE 3.DETUNE 3.CHO 4.FLG 2.ANALOG 3.ROOM 1
3.DELAY( TAP&HOLD )
3.PEDAL-WAH 4.PEDAL-PITCH 5.TREM/PAN 3.HOLD 4.ROOM 2
4.BYPASS
4.AUTO-WAH 5.STRING 6.RING MOD 5.PP-DELAY
5.MUTE
High/Depth Pitch/Key Pitch/Key/Depth Time(x100mS) Time 6.RTM
7.VOLUME
U
Midf/Rate/Sens Tone/Scale/Time Fine/Scale/Rate Time(x1mS) Tone/FB
EDIT(CANCEL)
MidG/Reso Shift/Mode/Dly Shift/Mode Feedback Mix
Low/Stage/Inv Bal/Mix Bal/Mix/Peak Mix Patch Level
Level Amp Sim Mode SERI/PARA SEAMLESS FUNCTION Mode
EQ RTM EFFECT1 RTM EFFECT2 RTM DELAY RTM REVERB RTM
BANK(VALUE)
BANK
U O
FUNCTION
(BOTH) SEAMLESS
USER PRESET
GROUP STORE
VALUE
ADVANCED GUITAR EFFECTS PROCESSOR
2
3
1
VALUE