Zoom player 3000 Operation Manual page 21

the BANK switch).
3: DELAY (TAP&HOLD)
Allows tap input of the delay time and for operating the hold delay
feature. For details, please refer to page 21, 22.
4: BYPASS
Toggle the bypass mode on and off. When this mode is selected, the
Foot Switches 1 - 4 cannot be used to control step 1 of the bypass
mode (page 9). When bypass is active, the FUNCTION LED is lit.
5: MUTE
Toggle the mute mode on and off. When this mode is selected, the
Foot Switches 1 - 4 cannot be used to control the mute mode (page
10). When mute is active, the FUNCTION LED is lit.
6: RTM
Control a selected effect parameter in real time. For details, please
refer to page 23.
7: VOLUME
Control the volume. For details, please refer to page 26.
The volume here refers to the input level of the EFFECT1 or
NOTE
EFFECT2 module. This is different from the patch level or master
level.
5
Press the EDIT key once more.
STEP
The 3000 returns to the Play mode.
This completes the mode setting for the FUNCTION switch.
FUNCTION Mode is a global parameter whose setting does not
NOTE
change when a different patch is selected. If not stored, the setting
reverts to the previous value when the unit is turned off and then on
again. When wishing to store the setting, select any patch in the
USER group and store it as described on page 17.
ADVANCED GUITAR EFFECTS PROCESSOR
EDIT ( CANCEL )
19