Table of Contents
Advertisement
EPN3600
immediately after the trigger. Input the desired length of post-trigger buffer
time. It can be set up to 120 seconds.
Press Apply to apply the setting changes or Reset to reset without saving
the change.
Re-trigger Filter Setting
Re-trigger Filter: Set a re-trigger filter time, if another event is triggered
during this time, this triggered event will be ignored.
Press Apply to apply the setting changes or Reset to reset without saving
the change.
2.7.4 Time Mask
Figure 2-61 Event – Time Mask
Time Mask Setting
Time mask setting allows you to schedule event actions.
Select Always for event action to be taken continuously.
Press
button to add new time period.
76
Advertisement
Table of Contents
