EverFocus PTZ SPEED DOME EPN3600 User Manual page 72

Ip ptz speed dome

Hide thumbs Also See for PTZ SPEED DOME EPN3600:

Table of Contents

pre-and post alarm buffer setting, please refer to "Alarm".

6. Check "Enable This Event".

7. Select "Always" for time mask. For detail about Time Mask, please refer

to "2.7.4 Time Mask".

8. Click

to save this event in event list.

Example 2: Alarm input – Go to PTZ Preset with Auto-Tracking

This example describes how to set the camera to go to PTZ preset and start

auto tracking at the preset position when there is alarm input:

1. Click

button in Event page.

2. Enter an event name for the event, e.g. Event 2.

3. Select "Alarm Input1" as event type.

EPN3600

Table of Contents