Mask name: Input a mask name for the new time period.
Check the check box for the day to be scheduled: Sun, Mon, Tue, Wed,
Thu, Fri & Sat.
Set the Start time and End time for time mask by clicking Up arrow or
Down arrow. Or simply press
Press
An example on how to set weekend as time mask is as follows:
1. Click
2. Enter Mask name, e.g. Weekend.
3. Check "Sun" & "Sat" boxes.
4. Select "Start time" and "End time" or "Full day".
Press Apply to apply the setting changes or Reset to reset without saving
the change.
2.8
SYSTEM
The "System" page has 3 tabs of the [Date/Time] tab, the [Daylight Saving]
tab and the [Maintenance] tab.
2.8.1 Date/Time
button to remove a scheduled time period.
from time mask setting.
Figure 2-62 System – Date/Time
77
for a full day of event action.
EPN3600