Areas - EverFocus PTZ SPEED DOME EPN3600 User Manual

2.4.2.3.2.1 Areas

In Areas menu, there is a sub-menu. Press ◄ button/ ► button to enter
Areas sub-menu (see
Figure 2-40 OSD/AREAS menu- Areas Sub-menu
In zone menu, you can set a zone and name it. When the speed dome
turns to the zone you set, it will display zone name on the screen (only if
"OSD/AREAS->Display -> Zone" is set as "YES").
How to set a zone
1. Click ▼ button/ ▲ button
modification and Click "Enter" after selecting. At this time, the first
digit of Title of this selected zone is flashing.
2. To change the title, click
to letter/number (A~Z, 0~9), and click
next digit position of title for modification.
3. Once the title is inputted, use ► button/◄ button to go "Range" section
Range section will flash as this time. Click "Enter" button to enter Left
Position Setting window (See Figure 2-41).
4. User can locate a left position by directly controlling from the live
screen. After select desired left position, press "Enter" to confirm.
).
Figure 2-40
to select desired zone number for
▼ button/ ▲ button to change the current digit
57
► button to move the cursor to
EPN3600