EverFocus PTZ SPEED DOME EPN3600 User Manual page 35

Figure 2-17 Tilt Range Setting – Down Limit Setting
c. Use arrows buttons and
desired down limit point.
d. Click IRIS+ button,
Click IRIS-,
Figure 2-18 Tilt Range Setting – Up Limit Setting
e. Use arrows buttons and
up limit point.
f. Click IRIS+ button,
button to return.
g. If tracking start point is outside the limits, the screen will show
" START POS IS OUTSIDE LIMIT. SET START POS" (see below
example screen) and user has to reset a start position between up
and down limits.
buttons at ○
, to enter next window (see
button to return.
buttons to locate a desired
to save and return, or Click IRIS-,
35
EPN3600
to locate a
2
) or
Figure 2-18