EverFocus PTZ SPEED DOME EPN3600 User Manual page 78

Machine Name Setting
Machine Name: Enter the name of the camera. The entered name will be
displayed in the status display area.
Press Apply to apply the setting changes or Reset to reset without saving
the change.
Set Time Zone
Time Zone: Select a time zone according to the location where the camera
is in use.
Set Date/Time Manually
Date: Click the calendar and pick the date. Press << to go previous year, <
to go previous month, > to go next month and >> to go next year.
Time: Click on Hour, Minute, Seconds, am/pm; then use Up arrow to
increase value and Down arrow to decrease value.
Press Apply to apply the setting changes or Reset to reset without saving
the change.
Set Date/Time Sync.
Check Enable NTP checkbox to enable NTP server.
NTP server: Time automatically adjusted by synchronizing with NTP server
will be used as the standard time of the camera.
Sync. Internal: Select an interval (1 - 24 hours: in 1 hour intervals) of
78
EPN3600