EverFocus PTZ SPEED DOME EPN3600 User Manual page 22

Note: If PPPoE is used as IP type, IP Utility software will not be able to detect
the device.
IP address
When DHCP is not used, user needs to manually enter the IP address of the
camera. Do not enter the IP address already used for PC or other network
cameras.
Subnet Mask
This field is used to set the netmask for your network so that the IP speed
dome will be recognized within the network. Example: 255.255.255.000.
When DHCP is selected, the DHCP server will assign this value
automatically.
Gateway
This field is used to set the gateway for your network so that the IP speed
dome will be recognized within the network. When DHCP is selected, the
DHCP server will assign this value automatically.
Primary DNS
Enter IP address of DNS server that is provided by ISP.
Secondary DNS
If your ISP provides you an IP address secondary DNS, please set it here.
Username
Enter User name of the account (used only for PPPoE).
Password
Enter Password of the account (used only for PPPoE).
Click Apply to apply the setting changes or Reset to reset without saving
the change.
22
EPN3600