Keeping Effect Sounds Playing After Patches Are Switched (Patch Change Mode) - Boss GT-10 Owner's Manual

Chapter 5 Making Global Settings
Keeping Effect Sounds Playing After Patches Are Switched
(Patch Change Mode)
The GT-10 features a mode that is enabled when spatial effects (such as reverb and delay) are used, whereby the effects sound of
one patch continues playing even after you switch to the next patch. If the necessary following conditions regarding the effects
chain and effect parameter settings are met, you can then have the decay of reverb, delay, and similar effects continue on into the
next patch after you switch patches.
• Effects are in the same effects chain
• When switching the delay off or on, or when the Type parameter and Dly Time parameter are identical
• When switching other effects off or on, or when the parameter settings are identical
There still may be no reverberation in some cases, even after the above settings are made.
SYSTEM
The SYSTEM MENU screen appears.
1.
Select PLAY OPTION.
2.
The PLAY OPTION screen appears.
3.
Move the cursor to Patch ChgMode.
4.
Select the value of the Patch ChgMode parameter.
5.
Value Explanation
Patches are changed normally. The unit switches to the subsequent patch without any carry-over of the decay
Fast
from the previous patch's reverb or delay.
The unit switches to the subsequent patch with the decay from the previous patch's reverb or delay continued
after the switch is made.
Smooth
To ensure smooth switching, the patches may be switched with a delay of one tempo beat.
68