Auto Wah (Auto Wah); Sub Wah - Boss GT-10 Owner's Manual

AUTO WAH (Auto Wah)

This changes the filtering over a periodic cycle, providing an
automatic wah effect.
Parameter/ Explanation
Range
Mode
Selects the wah mode.
This creates a wah effect over a wide fre-
LPF
quency range.
This creates a wah effect in a narrow fre-
BPF
quency range.
Frequency
Adjusts the center frequency of the Wah
0–100
effect.
Peak
Adjusts the amount of wah effect applied
in the range near the center frequency.
Higher values will produce a stronger
0–100 tone which emphasizes the wah effect
more.
With a value of 50 a standard wah sound
will be produced.
Rate
0–100,
Adjusts the frequency (speed) of the
change.
BPM –BPM
When set to BPM, the value of each parameter will be set accord-
ing to the value of the "Master BPM" (p. 122) specified for each
patch. This makes it easier to achieve effect sound settings that
match the tempo of the song.
* If, due to the tempo, the time is longer than the range of allowable
settings, it is then synchronized to a period either 1/2 or 1/4 of that
time.
Depth
0–100 Adjusts the depth of the effect.
EffectLev (Effect Level)
0–100 Adjusts the volume of the effect sound.
DirectLev (Direct Level)
0–100 Adjusts the volume of the direct sound.
Chapter 8 Parameters Guide

SUB WAH

You can control the wah effect in real time by adjusting the
EXP Pedal or the expression pedal connected to the EXP
PEDAL 2 jack.
Parameter/ Explanation
Range
Type
Selects the type of wah.
This models the sound of the CRY BABY
CRY WAH
wah pedal popular in the '70s.
VO WAH This models the sound of the VOX V846.
Fat WAH This is a wah sound featuring a bold tone.
This wah has a refined sound with no un-
Light WAH
usual characteristics.
This expanded wah features a variable
7string WAH range compatible with seven-string and
baritone guitars.
This completely original effect offers en-
Reso WAH hancements on the characteristic reso-
nances produced by analog synth filters.
Pedal Pos (Pedal Position)
Adjusts the position of the wah pedal.
0–100
This parameter is used after it's been assigned
to an EXP Pedal or similar controller.
Pedal Min (Pedal Minimum)
Selects the tone produced when the heel
0–100
of the EXP Pedal is depressed.
Pedal Max (Pedal Maximum)
Selects the tone produced when the toe of
0–100
the EXP Pedal is depressed.
EffectLev (Effect Level)
0–100 Adjusts the volume of the effect sound.
DirectLev (Direct Level)
0–100 Adjusts the volume of the direct sound.
103