Saving A Sound (Write); Saving A Patch (Patch Write); Exchanging Patches (Patch Exchange); Initializing Patches (Patch Initialize) - Boss GT-1000 Parameter Manual

Saving a Sound (WRITE)

Saving a Patch (PATCH WRITE)

When you want to save a patch you have created, save it as a user
patch by following the procedure below. If you do not save the patch,
the edited settings will be lost when you turn off the power or switch
to another patch.
* If CONTROL MODE (p. 28) is set to PEDALBOARD, items other than
"INITIALIZE" cannot be selected.
1
Press the [WRITE] button.
2
Press knob [1] to select "WRITE" (PATCH WRITE).
3
Use knob [1] to select the save-destination (U01-1–
U50-5).
You can use knobs [3]–[6] to edit the name.
Editing a name
To edit the patch name, use knob [6] to move the cursor and use
knob [5] to change the character.
Controller
Turn the [3] knob
Press the [3] knob
Turn the [4] knob
Press the [4] knob
Turn the [5] knob
Turn the [6] knob
* If you decide to cancel without writing, press the [EXIT] button a
several times. You'll be returned to the Play screen.
4
Press the [WRITE] button once again.
The patch is written.
50
Function
Selects the type of characters
Delete one character (delete)
Switch uppercase/lowercase
Insert one space (insert)
Changes the character
Moves the cursor

Exchanging Patches (PATCH EXCHANGE)

On the GT-1000, you can "swap" or exchange the positions of two
User patches.
1
Select the exchange source patch.
2
Press the [WRITE] button.
3
Press knob [2] to select "EXCHANGE" (PATCH
EXCHANGE).
4
Use knob [1] to select the other user patch that you
want to exchange.
* If you decide to cancel without exchanging, press the [EXIT]
button a several times. You'll be returned to the Play screen.
5
Press the [WRITE] button once again.
A confirmation message appears.
6
Press the [6] knob.
The patches will be exchanged. If you decide to cancel the
exchange operation, press knob [5].

Initializing Patches (PATCH INITIALIZE)

You can return (initialize) a User patch to its original factory settings.
This is convenient when you want to create a new patch from scratch.
NOTE
Any tone settings you've stored in a patch are lost once the
initialization is executed.
1
Press the [WRITE] button.
2
Press knob [3] to select "INITIALIZE" (PATCH INITIALIZE).
3
Use knob [1] to select the user patch that you want
to initialize.
* If you decide to cancel without initializing, press the [EXIT] button
a several times. You'll be returned to the Play screen.
4
Press the [WRITE] button once again.
A confirmation message appears.
5
Press the [6] knob.
The patch will be initialized. If you decide to cancel the initialize
operation, press knob [5].