Nortel 1000 Installation And Commissioning Manual page 77

3
4
5
Copyright © 2003-2007, Nortel Networks
.
The power source must not feed the power back into the DSL
through the RJ-45 wall outlet, only to the local ISDN BRI terminal.
The power adapter is normally supplied with the terminal.
Figure 28 "Connecting the ISDN BRI terminal to the S/T interface"
(page 78) illustrates an ISDN BRI terminal connection to an S/T
interface. Figure 29 "Connecting the ISDN network terminator to the
U interface" (page 79)
a U interface.
Enter the Static TEI at the terminal.
Note: Do not perform this step to assign Dynamic TEIs since
they are automatically assigned.
Enter the Service Profile ID number at the terminal.
For detailed information about this procedure, refer to the terminal
user guide.
Repeat step 1 to step 4
Nortel Communication Server 1000
ISDN Basic Rate Interface Installation and Commissioning
NN43001-318 01.02 Standard
Release 5.0 20 June 2007
illustrates an ISDN BRI terminal connection to
for each ISDN BRI terminal.
—End—
Installation procedures 77