HP Surestore 64 - Director Switch User Manual page 95

Command Example
Root>
show loginServer
Output
The device information is displayed as a table that includes the following properties.
Port The port number where the device is attached.
BB Crdt The maximum number of remaining frames that can be transmitted without
causing a buffer overrun condition at the receiver.
RxFldSz The buffer-to-buffer receive data field size from the FLOGI received from the
attached N_Port.
COS The class of service (for example, 1; 2; 3; 4; 5; 6; F; 1,2; 2,3).
Port Name The port world-wide name of the attached device.
Node Name The node world-wide name of the attached device.
Output Example
The output from the show.loginServer command displays as follows.
Port BB Crdt RxFldSz
---- ------- -------
0 10
1 10
4 10
7 10
8 10
10 10
11 10
12 10
13 10
15 10
COS Port Name
--- -----------------------
2,3 00:11:22:33:44:55:00:77
2 00:11:22:33:44:55:00:77
2,3 00:11:22:33:44:55:00:77
2,3 00:11:22:33:44:55:00:77
2 00:11:22:33:44:55:00:77
2,3 00:11:22:33:44:55:00:77
2,3 00:11:22:33:44:55:00:77
3 00:11:22:33:44:55:00:77
2,3 00:11:22:33:44:55:00:77
2,3 00:11:22:33:44:55:00:77
Node Name
-----------------------
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
show 83