config.zoning.addZone
Syntax
addZone "zoneName"
Purpose
This command adds a new (empty) zone to the zone set in the work area.
Description
Changes are not activated on the switch until the config.zoning.activateZoneSet command
is issued. The CLI supports the number of zones per zone set specified for a given product.
Parameters
This command has one parameter.
zoneName
Specifies the name of the new zone. The zoneName must contain 1–64
characters. Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz012345
6789$-^_
Spaces are not permitted, and the first character must be alphabetical.
Command Example
Root>
config zoning addZone TheUltimateZone
config.zoning.deleteZone
Syntax
deleteZone "zoneName"
Purpose
This command deletes a zone from the zone set in the work area.
54
config