Config.security.portbinding.wwn - HP Surestore 64 - Director Switch User Manual

Parameters
This command has two parameters.
portNumber Specifies the port number for which the port binding state is being set. Valid
port number values are:
0–63 for the FC-64
portBindingState
Specifies the port binding state as active or inactive. Valid values are
and
true
WWN configured with the config.security.portBinding.wwn command. If no
WWN has been configured, no devices can log in to that port.
false
specified port in this state, regardless of the WWN setting.
Boolean 1 and 0 may be substituted as values.
Command Examples
Root>
config security portBinding bound 4 true
Root>
config security portBinding bound 4 1

config.security.portBinding.wwn

Syntax
wwn portNumber boundWwn
Purpose
This command configures the single device WWN to which a port is bound.
28 config
false
.
sets the port binding to active. The specified port will be bound to the
sets the port binding to inactive. Any device is free to connect to the
true