Output Example
The output from the config.security.portBinding.show command displays as follows.
Port Number:
4
WWN Binding:
Active
Bound WWN:
AA:99:23:23:08:14:88:C1
config.security.userRights
config.security.userRights.administrator
Syntax
administrator "username" "password"
Purpose
This command sets the name and password for administrator-level access.
Description
Immediately after the name and password for the administrator is set, you will be
prompted to log in with the new access rights.
Parameters
This command has two parameters.
username
Specifies the new user name for administrator-level login. Default is set to
Administrator
all characters in the USASCII character set, excluding control characters and
spaces. Spaces are not valid even though quotation marks are used.
password
Specifies the password for administrator-level login. Default is set to
password
characters in the USASCII character set, excluding control characters and
spaces. Spaces are not valid even though quotation marks are used.
. This parameter is 1–15 characters. Valid characters include
. This parameter is 1–15 characters. Valid characters include all
config
31