Show.system - HP Surestore 64 - Director Switch User Manual

show.system

Syntax
system
Purpose
This command displays a set of system attributes.
Parameters
This command has no parameters.
Command Example
Root>
show system
Output
The system attributes are displayed as a table that includes the following properties.
Name The system name as set in the config.system.name command.
Description The system description as set in the config.system.description command.
Contact The system contact as set in the config.system.contact command.
Location The system description as set in the config.system.description command.
Date/Time The system date and time as set in the config.system.date command.
Serial Number The serial number for the system.
Type Number The type number for the system.
Model Number The model number for the system (for example, FC-64).
EC Level The engineering change level installed.
Firmware Version The current firmware version installed.
Beaconing The enabled state of unit beaconing (true or false).
96 show